在SUN的机器中，联接磁盘阵列，用emulex lp8000（emulex lp8000n1,emulex lp8000f1）光纤通道卡替X6799A, SOLRAIS8自动识别LP8000, 但是看不到阵列的硬盘, 下面介绍怎么配置一些文件。

# Start lpfc auto-generated configuration -- do NOT alter or delete this line
# WARNING: anything you put within this auto-generated section will
# be DELETED if you execute pkgrm to remove the lpfc driver package.
# You may need to add additional lines to probe for additional LUNs
# or targets. You SHOULD delete any lines that represent lpfc targets
# or LUNs that are not used.
# You should add any new entries between this line
# and the End lpfc auto generated configuration line
# name="sd" parent="lpfc" target=16 lun=0;
# name="sd" parent="lpfc" target=17 lun=0;
# A small number of LUNs for a RAID array
# name="sd" parent="lpfc" target=17 lun=1;
# name="sd" parent="lpfc" target=17 lun=2;
# name="sd" parent="lpfc" target=17 lun=3;
# End lpfc auto-generated configuration -- do NOT alter or delete this line

/etc/system:
* The forceload of drv/clone is required for successful
* IP operation of EMULEX fibre channel drivers lpfc / lpfs
* and for the diagnostics (dfc) interface.
forceload: drv/clone

更多的产品资料http://www.scsiworld.com/software/cpxx9.htm